Keilriemen
Riemen SANOK RUBBER:
Downloads
Ausführliches Angebot
Ausführliches Angebot / Keilriemen
Sanok Rubber V-belts
Sanok Rubber V-belts
Ausführliches Angebot / Keilriemen
Sanok Rubber V-belts
Zurück
|
SOLID V-BELTS Offered range of Solid: |
SUPER V-BELTS Offered range of SUPER V-belts:
|
|
SUPER VX V-BELTS Offered range of SUPER VX V-belts: |
SUPER KVX V-BELTS Offered range of SUPER VX V-belts: |
|
SUPER K V-BELTS Offered range of SUPER K V-belts: |
Harvest Belts®
Harvest Belts®
Ausführliches Angebot / Keilriemen
Harvest Belts®
ZurückSanok Rubber Company S.A.'s Harvest Belts® line of products for combine harvesters and self-propelled forage harvesters was developed to meet the needs of agricultural machinery users who expect reliable, high-quality V-belts, suitably matched to drives. Thanks to individually designed construction, Harvest Belts® offer an alternative to original V-belts installed in agricultural machinery drives. These belts are offered according to SANOK RUBBER COMPANY S.A.’s catalogue numbers, with references the original numbers.
To order Harvest Belts®, you need only provide the catalogue number. Sanok Rubber Company S.A. chooses the appropriate quality and dimensions.
For more information on agricultural Harvest Belts®, see the Harvest Belts® catalogue and visit www.harvestbelts.pl.
Garden Belts™
Garden Belts™
Ausführliches Angebot / Keilriemen
Garden Belts™
ZurückOffered range of Garden Belts™:
• sections 3L, 4L, 5L;
• double sided belts (HAA, HBB);
• classical section (Z, A, B);
• narrow section (SPZ, SPA).
Description:
• aramid cord – maximum elongation under load of up to 0.5% of length;
• breaking strength increased to 200%;
• compound based on chloroprene rubber;
• belt core made of rubber reinforced with a textile fibre, offering additional deformation strength and compressive strength;
• one-side rubberized cotton-polyester cover fabric, ensuring smooth clutching operation;
• temperature resistance from -35°C to +100°C.
Applications:
Garden Belts are intended for use in gardening equipment, such as lawn mowers, tractors, riders, etc.
VEGE BELTS™
VEGE BELTS™
Ausführliches Angebot / Keilriemen
VEGE BELTS™
ZurückSanok Rubber Company S.A. offers belts intended for use in carrot harvesters.
A special overlay on the top of the belt improves carrot pulling with harvesters.
Description:
- polyester cord – maximum elongation under load of up to 1,5% of length;
- compound based on chloroprene rubber;
- abrasion resistant cotton-polyester cover fabric;
- homogeneous connection of the overlay with the belt is obtained by simultaneous vulcanization of both elements;
- long belt life reducing maintenance-costs.
Belts for flax harvesting
Belts for flax harvesting
Ausführliches Angebot / Keilriemen
Belts for flax harvesting
ZurückSanok Rubber Company S.A. offers belts intended for use in flax harvesters.
Description:
- maximum circumferential velocity: 60m/s;
- temperature resistance from -300C to +1000C;
- oil-resistant;
- high length stability;
- flexibility;
- long belt life reducing maintenance-costs.
Optimum PRO™Belts
Optimum PRO™Belts
Ausführliches Angebot / Keilriemen
Optimum PRO™Belts
ZurückOffered range of OptimumPRO:
- narrow section single belts (SPA, SPB, SPC, 5V/15N, 8V/25N);
- narrow section power bands (SPA BP, SPB BP, SPC BP, 5V/15J).
Description:
- service-free – specially impregnated polyester cord provides uniquely small elongation;
- powerful – up to 70% higher power ratings compared to SOLID belts;
- compound based on chloroprene rubber;
- belt core made of rubber reinforced with a textile fibre, offering additional deformation strength and compressive strength;
- high quality cover fabric significantly increases belt life;
- suitable for use with idler pulleys;
- produced in L=L tolerance – can be used in sets without measuring;
- temperature resistance from -350C do +1000C;
- oil-resistant;
- antistatic according to ISO 1813;
- REACH and RoHS compliant.
Applications:
OptimumPRO™ V-belts are recommended for high-load drives with frequent overloads where the possibility to tension the belts is limited. Example applications: pumps, compressors, crushers, presses, fans and other equipment exposed to high-load.
DURO™ Belts
DURO™ Belts
Ausführliches Angebot / Keilriemen
DURO™ Belts
ZurückOffered range of Duro™ V-belts:
• narrow section (SPZ, SPA, SPB, SPC, 13.4x10.7);
• classical section belts (Z, A, B, 20x12.5, C, 25x16, D, E).
Description:
• polyester cord – maximum elongation under load of up to 1,5% of length;
• compound based on chloroprene rubber;
• belt core made of rubber reinforced with a textile fibre, offering additional deformation strength and compressive strength;
• abrasion resistant and flexible cotton-polyester cover fabric;
• fire resistance (in accordance with PN-EN 1710+A1);
• non-toxic
• antistatic according to ISO 1813);
• temperature resistance from -350C do +1000C;
• oil-resistant.
Applications:
DURO V-belts are intended for use in potentially explosive atmospheres, in particular in underground mines, mills, liquid fuel reloading stations. These belts are fire resistance, antistatic, non-toxic and durable, and can operate efficiently with machinery.
Tyres for elastic couplings
Tyres for elastic couplings
Ausführliches Angebot / Keilriemen
Tyres for elastic couplings
ZurückSanok Rubber Company S.A. manufactures tyres for PNEUMABLOCK® elastic couplings, which have been designed specifically for heavy-duty applications.
They are used for absorbing vibrations in drive systems and compensating for the effects of axial, transverse and angular misalignment of machine axles.
Characteristics of PNEUMABLOCK® elastic couplings:
• interchangeable with elastic couplings from other manufacturers;
• can be replaced without dismantling discs;
• available as PV (detachable hub) and PP (pre-drilled hub) versions;
• anticorrosive coating;
• available neoprene version for use in ATEX areas;
• PV 70 to PV 120 reversible discs;
• small axial dimensions;
• maintenance-free.
NARROW SECTION V-BELTS
NARROW SECTION V-BELTS
Ausführliches Angebot / Keilriemen
NARROW SECTION V-BELTS
ZurückNarrow section V-belts are manufactured in the following designs:
• SOLID V-belts;
• OptimumPro V-belts;
• SUPER K V-belts;
• DURO™ V-belts;
• Garden Belts™;
Characteristics of narrow section V-belts:
• maximum peripheral speed: 40m/s;
• temperature resistance from -35°C to +100°C;
• oil-resistant;
• antistatic.
Narrow section V-belts are manufactured according to the following standards:
• PN-ISO 4184 „Classical and narrow V-belts. Lengths in datum system.”;
• Stomil Sanok ZN-78 sheet 00 „V-belts. Requirements. Inspection and testing methods.”;
• Stomil Sanok ZN-78 sheet 02 „Narrow section V-belts. Requirements.”;
• PN-ISO 1081 „Belt drives. V-belts and V-ribbed belts, and corresponding grooved pulleys. Vocabulary.”;
• ISO 1813 „Belt drives – V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts – Electrical conductivity of antistatic belts: Characteristics and methods of test.”;
• ISO 2230 „Rubber products. Guidelines for storage.”;
• PN-ISO 1817 „Rubber. Determination of the effect of liquids.”.
Narrow section - ISO standard
| Section | Approximate dimensions | Length range [mm] | Additional length [mm] | Designation | |
| Width [mm] | Height [mm] | ||||
| SPZ | 9.7 | 8 | 760 - 3000 | 537 ; 562 ; 578 ; 612 ; 637 ; 662 ; 687 ; 700 ; 712 ; 719 ; 721 ; 737 | Ld (datum length) |
| SPA | 12.7 | 10 | 1220 - 5000 | 732 ; 757 ; 782 ; 807 ; 832 ; 857 ; 882 ; 932 ; 957 ; 982 ; 1007 ; 1032 ; 1057 ; 1082 ; 1107 ; 1132 ; 1157 ; 1182 ; 1207 | Ld (datum length) |
| SPB | 16.3 | 13 | 1250 - 10000 | Ld (datum length) | |
| SPC | 22 | 18 | 1750 - 18000 | Ld (datum length) | |
| 13.4x10.7 | 13.4 | 10.7 | 1240 - 3000 | Ld (datum length) | |
Narrow section - RMA/MPTA standard
CLASSICAL SECTION V-BELTS
Classical section V-belts
Ausführliches Angebot / Keilriemen
CLASSICAL SECTION V-BELTS
ZurückClassical V-belts are manufactured in the following designs:
• SOLID V-belts;
• SUPER V-belts;
• SUPER K V-belts;
• DURO™ V-belts;
• Garden Belts™.
Characteristics of classical V-belts:
• maximum peripheral speed: 30m/s;
• temperature resistance from -35°C to +100°C;
• oil-resistant;
• antistatic.
Classical V-belts are manufactured according to the following standards:
• PN-ISO 4184 „Classical and narrow V-belts. Lengths in datum system.”;
• Stomil Sanok ZN-78 sheet 00 „V-belts. Requirements. Inspection and testing methods.”
• Stomil Sanok ZN-78 sheet 01 „Classical V-belts. Requirements.”;
• PN-ISO 1081 „Belt drives. V-belts and V-ribbed belts, and corresponding grooved pulleys. Vocabulary.”;
• ISO 1813 „Belt drives – V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts – Electrical conductivity of antistatic belts: Characteristics and methods of test.”;
• ISO 2230 „Rubber products. Guidelines for storage.”;
• PN-ISO 1817 „Rubber. Determination of the effect of liquids.”.
| Section | Approximate dimensions | Length range [mm] | Additional length [mm] | Designation | |
| Width [mm] | Height [mm] | ||||
| Z | 10 | 6 | 760 - 3000 | 500 ; 530 ; 560 ; 582 ; 600 ; 630 ; 670 ; 710 ; 750 | Ld (datum length) |
| A | 13 | 8 | 760 - 5000 | 500 ; 530 ; 560 ; 600 ; 630 ; 670 ; 710 ; 750 | Ld (datum length) |
| B | 17 | 11 | 760 - 10000 | 630 ; 670 ; 710 ; 750 | Ld (datum length) |
| 20X12,5 | 20 | 12,5 | 1220 - 10000 | Ld (datum length) | |
| C | 22 | 14 | 1220 - 18000 | Ld (datum length) | |
| 25X16 | 25 | 16 | 1300 - 10000 | Ld (datum length) | |
| D | 32 | 19 | 2000 - 18000 | Ld (datum length) | |
| HDM | 32 | 16 | 1800 - 6096 | La (outside length) | |
| E | 38 | 23 | 4350 - 18000 | Ld (datum length) | |
| 36X23,5 | 36 | 23,5 | 3200 - 6096 | Li (inside length) | |
Section 3L, 4L, 5L
WIDE SECTION V-BELTS
Wide section V-belts
Ausführliches Angebot / Keilriemen
WIDE SECTION V-BELTS
ZurückWide section V-belts are manufactured in the following designs:
• SOLID V-belts;
• SUPER V-belts;
• SUPER K V-belts.
Characteristics of wide section V-belts:
• maximum peripheral speed: 30m/s;
• temperature resistance from -35°C to +100°C;
• oil-resistant;
• antistatic;
• high section stiffness ensuring long service life.
Wide section V-belts are manufactured according to the following standards:
• PN-ISO 3410 „Agricultural machinery. Endless variable-speed V-belts and groove sections of corresponding pulleys.”;
• Stomil Sanok ZN-78 sheet 00 „V-belts. Requirements. Inspection and testing methods.”;
• Stomil Sanok ZN-78 sheet 03 „Wide section V-belts for agricultural applications. Requirements.”;
• Stomil Sanok ZN-73 „Wide section notched, notch-free, cord and fabric V-belts. General requirements and dimensions.”;
• PN-ISO 1081 „Belt drives. V-belts and V-ribbed belts, and corresponding grooved pulleys. Vocabulary.”;
• ISO 9608 „V-belts – Uniformity of belts – Test method for determination of centre distance variation.”;
• ISO 1813 „Belt drives – V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts – Electrical conductivity of antistatic belts: Characteristics and methods of test.”;
• ISO 2230 „Rubber products. Guidelines for storage.”;
• PN-ISO 1817 „Rubber. Determination of the effect of liquids.”.
| Section | Approximate dimensions | Length range [mm] | Additional length [mm] | Designation | |
| Width [mm] | Height [mm] | ||||
| HI | 25,4 | 12,7 | 2265 | Ld (datum length) | |
| HJ | 31,9 | 15,1 | 1250 - 3000 | 1181 | Ld (datum length) |
| HK | 38,1 | 17,5 | 1600 - 5000 | Ld (datum length) | |
| HL | 44,5 | 19,8 | 3190 - 6096 | 1940 ; 2070 ; 2180 ; 2310 ; 2345 ; 2544 ; 2830 ; 3186 | Ld (datum length) |
| HM | 50,8 | 22,2 | 3190 - 6096 | 1540 ; 1777 ; 1882 ; 2052 ; 2072 ; 2130 ; 2222 ; 2265 ; 2310 ; 2415 | Ld (datum length) |
| 62x25 | 62 | 25 | 2136 ; 2300 ; 2325* | Ld (datum length) | |
* - 62X25-2325 - only version with aramid cords available
RAW-EDGE COGGED WIDE SECTION V-BELTS
Raw-edge cogged wide section V-belts
Ausführliches Angebot / Keilriemen
RAW-EDGE COGGED WIDE SECTION V-BELTS
ZurückRaw-edge cogged wide section V-belts are manufactured in the following designs:
• SUPER VX;
• SUPER KVX.
Compared to wrapped V-belts, notched wide section V-belts have the following advantages:
• higher efficiency;
• higher power transmission;
• better cooling;
• possibility of using smaller pulley dimensions.
Raw-edge cogged, variable-speed V-belts for power transmission, offering smooth speed adjustment of the driven pulley, often at high temperature, where wrapped V-belts have no or limited application. Thanks to their flexibility, raw-edge cogged V-belts can be installed in transmissions using pulleys with much smaller diameters without the risk of belt overload on the pulley, which permits higher transmission ratios. Raw-edge cogged variable-speed V-belts also offer high transverse stiffness, ensuring a greater compressive strength with minimum belt thickness.
Wide section raw-edge cogged V-belts are manufactured according to the following standards:
• PN-ISO 3410 „Agricultural machinery. Endless variable-speed V-belts and groove sections of corresponding pulleys.”;
• Stomil Sanok ZN-73 „Wide section notched, wrapped V-belts and V-belts made of cord fabric. General requirements and dimensions.”;
• Stomil Sanok ZN-78 sheet 00 „V-belts. Requirements. Inspection and testing methods.”;
• Stomil Sanok ZN-78 sheet 04 „Wide section notched V-belts. Requirements.”;
• ISO 9608 „V-belts – Uniformity of belts – Test method for determination of centre distance variation.”;
• PN-ISO 1081 „Belt drives. V-belts and V-ribbed belts, and corresponding grooved pulleys. Vocabulary.”;
• ISO 2230 „Rubber products. Guidelines for storage.”.
| Section | Approximate dimensions | Length [mm] | Designation | |
| Width [mm] | Height [mm] | |||
| 28x16 | 32 | 16 | 1450 | Ld (datum length) |
| 30x13 | 30 | 13 | 1680 | Li (inside length) |
| 30x15 | 30 | 15 | 1680 | Li (inside length) |
| 38x18 | 38 | 18 | 1440 | Li (inside length) |
| 38x18 | 38 | 18 | 1500 | Ld (datum length) |
| 40x12 | 40 | 12 | 1360 | Li (inside length) |
| 40x13 | 40 | 13 | 920 | La (outside length) |
| HL | 45 | 20 | 1920 ; 2362 ; 3186 ; 3200 | Ld (datum length) |
| HM | 50 | 22 | 1860 ; 2052 ; 2072 ; 2130 ; 3215 | Ld (datum length) |
| 50,8x24 | 51 | 24 | 2270 | Ld (datum length) |
| 55x22 | 55 | 22 | 1860 | Ld (datum length) |
| 55x22 | 55 | 22 | 2021 | Li (inside length) |
| 55x25 | 55 | 25 | 1800 | Ld (datum length) |
| 55x25 | 55 | 25 | 2285 | Li (inside length) |
| 59x23 | 59 | 23 | 2161 | La (outside length) |
| 62x25 | 62 | 25 | 2078 ; 2136 ; 2390 | Ld (datum length) |
| 63x26 | 63 | 26 | 2290 | La (outside length) |
| 63x27 | 63 | 27 | 2115 | Ld (datum length) |
| 68x24 | 68 | 24 | 2485 | Li (inside length) |
| 68x24 | 68 | 24 | 2600 | Ld (datum length) |
| 74x30* | 74 | 30 | 2611 | La (outside length) |
* - 74X30 is raw-edge double cogged (inner and outer surfaces are cogged)
POWER BANDS
Power bands
Ausführliches Angebot / Keilriemen
POWER BANDS
ZurückPower bands consist of several V-belts joined together by a permanent tie band. In particular, they are used in transmissions with dynamic variable loads, vertical pulley axles and flat belt drives.
Power bands are manufactured in the following designs:
• SOLID V-belts;
• SUPER V-belts (A BP, B BP, C BP);
• SUPER K V-belts;
• OptimumPro (SPA BP, SPB BP, SPC BP, 5V BP).
Characteristics of power bands:
• maximum peripheral speed: 30m/s;
• temperature resistance from -30°C to +100°C;
• oil-resistant;
• antistatic.
Power bands are manufactured according to the following standards:
• Stomil Sanok ZN-78 sheet 00 „V-belts. Requirements. Inspection and testing methods.”;
• Stomil Sanok ZN-78 sheet 05 „Joined V-belts. Requirements.”;
• ISO 5290 „Belt drives – Grooved pulleys for joined narrow V-belts. Groove sections 9N/J, 15N/J and 25N/J (effective system).”;
• ISO 5291 „Belt drives – Grooved pulleys for joined classic V-belts. Groove sections AJ, BJ, CJ and DJ (effective system).”;
• ISO 1813 „Belt drives – V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts – Electrical conductivity of antistatic belts: Characteristics and methods of test.”;
• ISO 2230 „Rubber products. Guidelines for storage.”;
• PN-ISO 1817 „Rubber. Determination of the effect of liquids.”;
• PN-ISO 1081 „Belt drives. V-belts and V-ribbed belts, and corresponding grooved pulleys. Vocabulary.”.
Classical section power bands
| Section | Approximate dimensions | Length range [mm] | Designation | |
| Width [mm] | Height [mm] | |||
| A BP | 15,88 | 10,1 | 1250 - 3064 | Le (effective length) |
| B BP | 19,05 | 13,5 | 1250 - 10000 | Le (effective length) |
| C BP | 25,4 | 17 | 2000 - 10000 | Le (effective length) |
Narrow section power bands
| Section | Approximate dimensions | Length range [mm] | Designation | |
| Width [mm] | Height [mm] | |||
| SPA BP | 15 | 12,5 | 1250 - 5000 | Ld (datum length) |
| SPB BP | 19,05 | 16,7 | 1800 - 10000 | Ld (datum length) |
| SPC BP | 25,5 | 22,9 | 2200 - 10000 | Ld (datum length) |
Narrow section power bands - RMA/MPTA standard
DOUBLE-SIDED V-BELTS
Double-sided V-belts
Ausführliches Angebot / Keilriemen
DOUBLE-SIDED V-BELTS
ZurückDouble-sided V-belts are intended for use in drives where there are multiple pulleys in the same plane and their sense of rotation changes.
Double-sided V-belts are manufactured in the following designs:
• SOLID V-belts;
• SUPER V-belts;
• SUPER K V-belts;
• Garden Belts™.
Characteristics of double-sided V-belts:
• maximum peripheral speed: 30m/s;
• temperature resistance from -35°C to +100°C;
• oil-resistant;
• antistatic.
Double-sided V-belts are manufactured according to the following standards:
• ISO 5289 „Agricultural machinery – Endless hexagonal belts and groove sections of corresponding pulleys.”;
• Stomil Sanok ZN-74 „V-belts. Double-sided (hexagonal) V-belts. General requirements and dimensions.”;
• PN-ISO 1081 „Belt drives. V-belts and V-ribbed belts, and corresponding grooved pulleys. Vocabulary.”;
• ISO 1813 „Belt drives – V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts – Electrical conductivity of antistatic belts: Characteristics and methods of test.”;
• ISO 2230 „Rubber products. Guidelines for storage.”;
• PN-ISO 1817 „Rubber. Determination of the effect of liquids.”.
| Section | Approximate dimensions | Length range [mm] | Designation | |
| Width [mm] | Height [mm] | |||
| HAA | 13 | 10,5 | 1250 - 4070 | Le (effective length) |
| HBB | 17 | 13,5 | 1750 - 5000 | Le (effective length) |
| HCC | 22 | 17,5 | 1800 - 6096 | Le (effective length) |
FLAT DRIVE BELTS
Flat drive belts
Ausführliches Angebot / Keilriemen
FLAT DRIVE BELTS
ZurückFlat drive belts allow a transmission to operate with smaller pulley diameters than required for V-belts.
Flat drive belts are manufactured in the following designs:
• SOLID V-belts;
• SUPER K V-belts.
Characteristics of flat drive belts:
• maximum peripheral speed: 60m/s;
• temperature resistance from -35°C to +100°C;
• oil-resistant;
• antistatic.
Flat drive belts are manufactured according to the following standards:
• Stomil Sanok ZN-72 „Flat agricultural belts. General requirements and dimensions.”;
• PN-ISO 1081 „Belt drives. V-belts and V-ribbed belts, and corresponding grooved pulleys. Vocabulary.”;
• ISO 1813 „Belt drives – V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts – Electrical conductivity of antistatic belts: Characteristics and methods of test.”;
• ISO 2230 „Rubber products. Guidelines for storage.”;
• PN-ISO 1817 „Rubber. Determination of the effect of liquids.”.
Typical manufactured sections:
120x5, 140x5, 140x7 and 150x5.
Flat belts with smaller widths can also be manufactured:
• 5 mm thick: 30x5, 35x5, 40x5, 45x5, 50x5, 55x5, 60x5, 65x5, 70x5, 75x5, 80x5, 85x5, 90x5, 100x5, 105x5, 110x5, 115x5, 125x5 and 130x5
• 7 mm thick: 30x7, 35x7, 40x7, 45x7, 50x7, 55x7, 60x7, 65x7, 70x7, 75x7, 80x7, 90x7, 95x7, 100x7, 105x7, 110x7, 115x7, 125x7, 130x7 and 135x7;
which are cut from vulcanised standard belts.
| Section | Approximate dimensions | Length range [mm] | Designation | |
| Width [mm] | Height [mm] | |||
| 120X5 | 120 | 5 | 1950 - 6096 | Li (inside length) |
| 140X5 | 140 | 5 | 1950 - 5000 | Li (inside length) |
| 140X7 | 140 | 7 | 1950 - 5000 | Li (inside length) |
| 150X5 | 150 | 5 | 1900 - 5000 | Li (inside length) |
The belts between 30 - 135 mm width are available on request.
![gielda.png [9 KB]](https://www.sanokrubber.com/storage/file/core_files/2017/3/14/96a57e2e5cb70ed8fce0f1fa1c59a157/gielda.png "gpw")
![komisja.png [10 KB]](https://www.sanokrubber.com/storage/file/core_files/2017/3/14/a73282c7f46f0984e66ad44b6a7f41f0/komisja.png "knf")
![seg.png [6 KB]](https://www.sanokrubber.com/storage/file/core_files/2017/3/28/b45b232ccb76f8aa56e8eaaa2d110fa2/seg.png "seg")
